Before you decide
Questions about the room, the appliance and the installation
Use these answers to find the right starting point. Exact clearances, materials and installation requirements always depend on the property and the model selected.

01
Planning the installation
Does my flue need lining?+
It depends on the condition and construction of the existing flue, the appliance and the proposed installation. Photographs and a property assessment help establish the right route.
Plan the installationDo I need a hearth?+
The hearth specification depends on the appliance and how it will be installed. Choose the intended model and setting before fixing the material, size or finished floor level.
Send room detailsCan the inside of the chamber be pink plaster board and skimmed?+
Do not assume ordinary plasterboard and skim are suitable close to an appliance. Chamber materials and clearances need to be checked against the chosen model and the complete fireplace design.
Discuss the fireplaceCan I have a wooden beam above the stove?+
A beam may be possible only where its material, position, clearances and any protection suit the chosen appliance and fireplace design. Resolve this before the beam or stove is ordered.
Send fireplace photographsDo I need an existing flue to have a stove?+
Not always. A suitable new flue route may be possible, but the property, appliance position, terminal location and access all need assessing together.
Explore flue installationCan I have a stove in my extension / conservatory?+
It may be possible. The room construction, suitable heat output, ventilation and a compliant flue route need to be considered before choosing the appliance.
Start with the propertyCan I fit it myself?+
The complete installation must meet the appliance instructions and current building requirements. Discuss the installation and notification route before any fireplace or flue work begins.
See the installation journeyCan I put a TV above my stove?+
That decision depends on appliance clearances, heat movement, the wall and any mantel or heat-deflection detail, as well as the television requirements. Plan both products before building the wall.
Plan a media-wall project02
Choosing the appliance
How much output do I need?+
Room volume is a useful starting point, but insulation, glazing, layout and existing heat all affect the decision. Share the room dimensions and property details before selecting a model.
Start a photo surveyWhat is the difference between multifuel stoves and woodburning stoves?+
A wood-burning stove is designed around logs. A multi-fuel model includes the grate and air arrangement needed for the other fuels approved for that appliance. Always check the exact model instructions.
Compare stove formatsWhat is the difference between radiant stoves and convection stoves?+
Radiant heat is felt more directly from the appliance, while a convection design encourages warmed air to move around the room. Room size, layout and where people sit can make one approach more suitable.
See the range in personAre all stoves made of cast iron?+
No. Stoves may use steel, cast iron or a combination of materials. Construction is one comparison point alongside output, proportions, glazing, controls and installation requirements.
Explore stoves and fires03
Living with a stove
Can I burn any type of wood?+
Use suitable dry firewood and follow the instructions for the exact appliance. Treated, painted or waste timber should not be used as fuel.
Browse wood-burning stovesWhat regulates the temperature?+
For a wood or multi-fuel stove, heat is influenced by fuel loading and the appliance air controls. The correct method is model specific, so use the manufacturer instructions and the handover guidance.
Ask about a modelCan I stack logs next to the stove?+
Combustible materials must stay outside the clearances required for the appliance and installation. Plan log storage as part of the room rather than assuming the space beside the stove is suitable.
Plan the roomDo I need a carbon monoxide detector?+
A suitable carbon monoxide alarm is an essential part of planning a solid-fuel installation. Its specification and position should be confirmed for the completed installation.
Discuss installation safetyHow often do I need to clean the flue?+
The right sweeping schedule depends on the fuel, appliance, chimney and how often it is used. Agree a routine with the chimney professional who inspects or sweeps the system.
Ask about chimney sweepingMy firebricks have cracked - what should I do?+
The significance depends on the extent of the damage and the appliance instructions. Stop relying on guesswork: send the model and a clear photograph so the correct replacement or next check can be identified.
Send a photographHow hot does the stove handle get?+
Treat the handle and nearby appliance surfaces as potentially hot while the stove is operating. Use the tool or glove supplied for the model and follow its operating instructions.
Ask about a particular modelA simple first step
Ask the showroom
If your question is specific to the property or a particular model, send the key details and the showroom can identify the next useful check.
Prefer to talk? Call 01625 402900.
Macclesfield showroom
Compare the options in person
Bring a photograph and rough dimensions to the Macclesfield showroom and use the displays to narrow the choice.