Heta Scan-Line 7L
View larger Close to the hearth.
Controlled from the front.
- Nominal output
- 4.5kW
- Efficiency
- 83%
- Energy rating
- A+
Choose your setup
Steel / cast-top body dimensions, not installation clearances. The low setup requires a noncombustible hearth and substrate; Heta requires the log store over a combustible floor.
These enquiry setups use the illustrated steel body with cast top. For the optional stone top, add your preference to the message so the material and current supply can be confirmed. Photographs do not change with your choices.
View the finishesPrice on request · installation quoted separately
Price on request. Please confirm current supply, the exact configuration and showroom display before travelling.
View larger The Scan-Line 7L keeps its tall fire window within a low, curved body. Two small air controls sit beneath the door, where you can reach them from the front. With the steel and cast-top setup, the appliance stands 725mm high; the optional open log store raises it by 288mm. That changes the height of the fire, the door and the controls together. The choice also depends on what is beneath your hearth, so bring that construction detail into the conversation alongside the look you prefer.
One appliance, two working heights
Keep the fire low.
Or bring it further up.
The open base lifts the same 7L appliance, rather than changing it into another Scan-Line model. Compare the door height from your usual seat, then think about the reach when loading wood and using the front controls. Both illustrated setups have the steel body and cast top.

Low · steel / cast top
The curved body close to the hearth
462 W × 725 H × 415 D mm
Short feet keep the stove near the hearth while the tall window draws the eye upwards. Heta’s GB manual permits the low 7L without a log store only where both the hearth and the substrate beneath it are noncombustible. The visible hearth surface alone does not settle that question.

Log store · steel / cast top
The same firebox, raised by 288mm
462 W × 1013 H × 415 D mm
The curved open base places the door and front controls higher and changes the outline below the fire. Heta’s GB manual requires the 7L to use a log store when installed over a combustible floor. The complete setting still needs its hearth, clearances and flue assessed.
The photographed setup and an optional top
A curved steel outline.
A top worth discussing.
The photographs show the steel body with its shallow cast top. These are the two body setups offered in the enquiry controls. Heta’s drawing also records an optional stone top, which changes the overall height, width and depth; ask us to confirm the stone material and current supply before choosing it.
Steel / cast top
The illustrated setup for both the low body and the optional open log store.
If you prefer a stone top
Add that preference to your enquiry message. The drawing gives 470mm width and 416mm depth, with a height of 754mm for the low version or 1042mm with the log store. We can discuss the available material without assuming that every photographed top or side panel in the wider Scan-Line range fits the 7L.
Keep the whole setup identifiable
Your selected low or log-store body is carried into the enquiry. Mention any top preference alongside it, so the dimensions and supplied parts can be confirmed together.
Current GB document figures
Four dimensional cases.
One clear model reference.
The linked GB manual and declarations identify the Scan-Line 7L at 4.5kW nominal output and 83% efficiency, with an A+ energy rating. This page describes that wood-burning specification. Use the exact model records when discussing an older appliance or a different supplied version.
| Fuel | Wood; follow the current GB manual’s fuel instructions |
|---|---|
| Nominal output | 4.5kW · current GB documents |
| Efficiency | 83% |
| Energy class | A+ |
| Low · steel / cast top · W × H × D | 462 × 725 × 415mm |
| Log store · steel / cast top · W × H × D | 462 × 1013 × 415mm |
| Low · optional stone top · W × H × D | 470 × 754 × 416mm |
| Log store · optional stone top · W × H × D | 470 × 1042 × 416mm |
| Flue outlet | 150mm; confirm the chosen route and conversion parts |
| Air controls | Two front controls: combustion air on the left, start-up air on the right |
| Ash access | Low ash pan inside the fire door |
Dimensions are from Heta’s exact 7L drawing and describe the appliance, not the required fireplace opening or clearances. Confirm the configuration and installation requirements before ordering. The low-body floor qualification in the GB manual applies alongside these measurements.
Look below the hearth as well as above it
The daily controls.
The construction underneath.
A low stove can suit the proportions of a setting, but appearance is only part of choosing its position. Think through the front-door access and establish the materials beneath the hearth before deciding on the base.
Reach both front controls
The 7L has a combustion-air control on the left and a separate start-up control on the right, both at the bottom of the front. Leave a comfortable approach to them and follow the GB manual’s lighting and operating sequence.
Identify the hearth and its substrate
Tell us whether the hearth sits over timber or another construction. Heta’s manual calls for the log store over a combustible floor; without the store, both the hearth and its substrate must be noncombustible. If the construction is unknown, make that part of the installation assessment.
Allow room to open and clean
The fire door gives access to the chamber and the low ash pan. Consider where you will stand to open it and handle cooled ash. The log store changes the reach, so compare the two heights as working positions as well as visual choices.
Bring the flue route into the discussion
A 150mm flue outlet is specified. Tell us about the existing chimney or proposed flue, and mention any direct-air requirement. The rear-outlet conversion and air connection need the correct components for the supplied appliance.
Manufacturer references for the UK model
Keep the 7L drawing
with the GB instructions.
The manual covers several Scan-Line 7 models. Its 7L front-control diagrams and floor qualification matter here; the separate drawing makes the low, log-store and optional stone-top dimensions easier to compare.
Read the cover for each part
The GB manual describes five-year manufacturing-defect cover, with shorter periods for paint adhesion, seals, vermiculite and glass. Online and third-party purchases have separate one-year terms, and exclusions apply. Confirm the conditions for your purchase and retain the model and installation records.
Read the guarantee on page 13Scan-Line 7 GB operating & installation manual
11 October 2025, version 2.7. See the 7L controls on page 5 and its floor qualification on page 11.
Scan-Line 7L dimensional drawing
Separate low and log-store heights, with steel and stone-top dimensions.
Scan-Line 7 GB declaration & fiche
Signed 20 November 2025; includes the 7L at 4.5kW, 83% and A+.
Scan-Line 7 GB performance declaration
Signed 20 December 2022; the listed series includes the 7L.
Scan-Line 7 energy label
Current linked series label: A+ and 4.5kW.
A simple first step
Discuss your Scan-Line 7L setup
Your chosen body appears below. Add any stone-top preference, the fireplace measurements and what you know about the construction beneath the hearth.
Prefer to talk? Call 01625 402900.
Macclesfield showroom
See it in person before you decide
Photographs only go so far. Come to the Macclesfield showroom to compare finishes, sizes and flame pictures side by side and talk through your room with the team.